Connecting Laserhybrid Hosepack To Laser Welding Head; Connecting The Laserhybrid Hosepack To The Laser Welding Head - Fronius LaserHybrid WF 25i Operating Instructions Manual

Connecting LaserHybrid Hosepack to Laser Weld-
ing Head
Connecting the IMPORTANT! When connecting the LaserHybrid hosepack, ensure that pins and
LaserHybrid connections on the interface are not bent or damaged.
hosepack to the Position the LaserHybrid hosepack to be as straight as possible.
laser welding
head
52
1
3
3
Connect LaserHybrid hosepack
1
Secure LaserHybrid hosepack:
2
Tighten union nut using torch
wrench and torque wrench
Tightening torque = 11 Nm
2
Remove 2 Allen screws size 2.5 mm
3
Remove 2 Allen screws size 2.5 mm
4
on the opposite side
4
Remove drive unit cover
5
5
4
45,0200,1404