In PM5D Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the latest operation
(Redo). If you perform an Undo operation twice in a row, you can cancel the two most-recent operations. If you per-
form an Undo operation three times in a row, you can cancel the three most-recent operations. In this way, you can
cancel multiple recent operations. The following table describes how to use the Undo/Redo function.
Choose [Undo] from the [Edit] menu.
Choose [Redo] from the [Edit] menu.
Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo
any previous operation:
• Operations on the PM5D console
• Quitting Studio Manager
• Changing the surround mode or pair mode
• Synchronizing with the PM5D console
• Session operations
• The GEQ [EQ FLAT] button
• Moving the fader positions by changing the GEQ variable width
You cannot Undo or Redo the following operations:
• Edits in the Setup window
• Opening and closing the windows
• Resizing the windows
In the Library window, you can Undo or Redo only the most recent operation. You cannot cancel the pre-
❏ Resetting to the default value (Ctrl ( ) + click)
Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click the mouse but-
ton to reset the value to the default (e.g., to reset an Input Channel fader to – ∞ , or reset a pan setting to Center).
❏ Ctrl ( ) +Shift+Click
Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ( ) and <Shift> key and click
the mouse button to reset the value to the nominal level.
PM5D Editor Owner's Manual