Adjusts the balance of the effect sound relative to the original sound. 0 (%) outputs only the original sound, and
100 (%) outputs only the effect sound.
This button temporarily bypasses the effect.
This button cue-monitors the output of the currently selected effect.
If a tempo-type or modulation-type effect is selected, this allows you to adjust time-related parameters such as
DELAY (delay time) and FREQ. (modulation speed).
To set the value of the TEMPO parameter, you can either input the BPM (Beats Per Minute) in the numerical box,
or repeatedly click the TAP TEMPO button at the desired tempo.
If the MIDI CLK button is on, the TEMPO parameter value will synchronize to the MIDI timing clock being
received from the MIDI port.
PLAY/REC (Play/Record) buttons
If "042 FREEZE" is selected as the effect type, you can use these buttons to record and play back the signal being
input to the effect.
PM5D Editor Owner's Manual