Yamaha PM5D Owner's Manual page 36

❏ COMPRESSOR
Except for the fact that the COMP LINK GROUP is A–F, and that the types of signal that can be selected for key-
in are different, this is the same as for the compressor of an input channel (➥ p.23).
❏ INSERT
Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings
of an input channel (➥ p.24).
❏ EQUALIZER
This is the same as the equalizer settings of a MIX channel (➥ p.30).
❏ DELAY
This is the same as for the delay settings of an input channel (➥ p.26).
❏ DCA GROUP / MUTE GROUP / SAFE
These are the same as the DCA Group / Mute Group / Safe settings of a MIX channel (➥ p.31).
❏ Pan / Fader
1
2
3
4
A
BALANCE
Adjusts the left/right output balance of the STEREO A/B channel.
B
ON
This switches the STEREO A/B channel on/off. This is linked with the STEREO [ON]
key in the STEREO A/B channel strip of the PM5D panel.
C Fader
Adjusts the output level of the STEREO A/B channel. This is linked with the STEREO
fader in the STEREO A/B channel strip of the PM5D panel. The current value is shown
in the numerical box immediately below.
D CUE
This button cue-monitors the signal of the STEREO A/B channel. This is linked with
the STEREO [CUE] key in the STEREO A/B channel strip of the PM5D panel.
36 PM5D Editor Owner's Manual