In this window you can view and edit the parameters of MIX channels 1–24. You can use the [View] menu to choose
the parameters that will be displayed in the window.
Switches the EQ on/off. The graph immediately below the button shows the approxi-
mate response of the EQ. You can drag the graph to edit the response of the EQ, or hold
down the <Ctrl> key (
it to a ﬂat response.
Switches the compressor on/off. When the compressor is on, the GR meter immediately
below the button shows the amount of gain reduction.
Enables/disables the insert-out that is patched in the PM5D's INSERT PATCH screen
(OUTPUT PATCH function).
Switches the delay on/off. You can also edit the delay time by dragging the numeric
value located immediately below the button up or down
Indicates the number of the MIX channel corresponding to this module. You can dou-
ble-click this number to open the Selected Channel window for this channel.
key) of your computer keyboard and click the graph to reset
PM5D Editor Owner's Manual