Other Functions - Yamaha 02R96 Version 2 Owner's Manual

• Changing Aux Send mode (Fixed/variable) on the console
• Starting automix recording or playback on the console
• Changing the sampling frequency (operated on the device)
• Changing the User Assignable Layer settings (operated on the device)
Note: You cannot Undo or Redo the following operations:
• Edits in the Setup window
• Synchronization
• Opening and closing the windows
• Resizing the windows
Note: In the Library window, you can Undo or Redo only the most recent operation. You cannot cancel
the preceding operations.

Other Functions

Copy & Paste Function
You can copy and paste not only the characters but the control positions in Studio Manager.
In the Console Setup window
The following table describes how to use the Copy & Paste function.
Copying characters
Pasting characters
Copying a channel
Pasting a channel
Resetting to the default value (Ctrl (
Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click
the mouse button to reset the value to the default (e.g., to reset an Input Channel fader to –∞, or
reset a pan setting to Center).
Ctrl( )+Shift+Click
Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ([ ]) and
<Shift> key and click the mouse button to reset the value to the nominal level.
(page 5), you can also specify the parameters to be copied.
Select copy source characters, right-click (<control>+click), then choose
[Copy].
Move the cursor to the copy destination, right-click (<control>+click), then
choose [Paste].
Right-click (<control>+click) a copy source channel, then choose [Copy].
Right-click (<control>+click) the copy destination channel, then choose
[Paste].
) + click)
Studio Manager for V2 02R96 Editor—Owner's Manual
8