Fx Rtn Window - Yamaha PM5D Owner's Manual

FX RTN window

In this window you can view and edit the mix parameters of FX RTN channels 1–4. You can use the [View] menu to
choose the parameters that will be displayed in the window.
1
2
3
4
5
6
A Input patch
Selects the input source that will be assigned to the FX RTN channel. The input sources
that can be assigned are the same as for an input channel (➥ p.6).
B +48V
Switches on/off the phantom power (+48V) of the internal head amp (PM5D-RH
model only) or of the external head amp (AD8HR, AD824) patched to the FX RTN
channel.
C HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp (PM5D-RH
model only) or of the external head amp (AD8HR, AD824) patched to the FX RTN
channel.
D HPF (High Pass Filter)
Switches the high pass filter on/off. You can drag the numeric value up or down to edit
the cutoff frequency.
E
Ø (Phase)
Inverts the phase of the signal after AD conversion.
F
EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked). The graph immediately below the
button shows the approximate response of the EQ. You can drag the graph to edit the
response of the EQ, or hold down the <Ctrl> key (
and click the graph to reset it to a flat response.
11
key) of your computer keyboard
PM5D Editor Owner's Manual