Other Functions - Yamaha DM1000 Version 2 Manual

Other Functions

❏ Copy & Paste Function
You can copy and paste the channel parameters.
In the Console Setup window
The following table describes how to use the Copy & Paste function.
Copying a channel
Pasting a channel
❏ Resetting to the default value (Ctrl ( ) + click)
Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click
the mouse button to reset the value to the default (e.g., to reset an Input Channel fader to –∞, or
reset a pan setting to Center).
❏ Ctrl( )+Shift+Click
Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ([ ]) and
<Shift> key and click the mouse button to reset the value to the nominal level.
(page 3), you can also specify the parameters to be copied.
Right-click (<control>+click) a copy source channel, then choose [Copy].
Right-click (<control>+click) the copy destination channel, then choose
[Paste].
DM1000 Editor—Owner's Manual
6