❏ MIX to MATRIX
MATRIX send level
This adjusts the send level of the signal sent from the MIX channel to the MATRIX buses.
This indicates the pairing status of adjacent odd-numbered/even-numbered MATRIX channels. You can click the
heart symbol to enable/disable pairing.
ON (MATRIX send on/off)
This is an on/off switch for the signal sent from the MIX channel to the MATRIX bus.
POINT (Send point)
Selects the point from which the signal is sent from the MIX channel to the MATRIX bus. You can choose PRE
FADER (immediately before the fader), POST FADER (immediately after the fader), or POST ON (immediately
after the MIX [ON] key).
CH to MIX POST POINT
Selects either POST ON or POST TO ST as the position from which the signal is sent from all input channels to
the currently selected MIX bus.
PM5D Editor Owner's Manual