Yamaha PM5D Owner's Manual page 3

Yamaha pm5d audio mixers: owners manual
Hide thumbs Also See for PM5D:
Table of Contents

Advertisement

❏ Console Setup
To open the Mixer Setup window, choose [Mixer Setup] from
the [File] menu.
Pair Mode:
Select whether faders will be paired Horizontally
or Vertically.
Pan Nominal Position:
nominal level when panned to the center (Center) or when
panned all the way to left or right (L<->R). You can make sepa-
rate settings for monaural channels and paired channels.
Bus Setup:
Select the MIX bus mode (VARI/FIXED) for
every two adjacent odd-numbered/even-numbered MIX buses.
MIX buses assigned as surround buses are indicated as "SUR-
ROUND" and cannot be changed.
Surround Bus Allocation:
8 or MIX 9–16) that will be used as surround buses.
Stereo B:
Specify whether the same signal as the STEREO A
bus will be sent to the STEREO B bus (Stereo Bus), or whether
the STEREO B bus will function as the CENTER bus for LCR
mode (Center Bus).
Surround Mode:
5.1, 6.1).
Synchronizing PM5D Editor
When PM5D Editor starts up, the parameter settings on the console and the parameter settings in PM5D Editor may
be different. Therefore, you must first match the parameter settings on the console with those in PM5D Editor. This
operation is called "synchronization." Follow the steps below to synchronize PM5D Editor.
1 Select [Synchronize], then [Re-synchronize].
The following window opens.
2 Select whether you want to transfer your settings to PM5D
Editor, or vice versa.
At this time, the All Libs option determines whether or not Scene and
Library data is synchronized.
PC -> Console:
Transfers the current parameter settings in PM5D Editor to your console.
Console -> PC:
Transfers the current parameter settings of your console to the PM5D Editor.
3 Click [OK].
Do not operate the console while synchronization is in progress.
If you use the "Total Recall" function in Studio Manager, all selected Editors in Studio Manager are syn-
NOTE
chronized with the corresponding devices.
Offline Edit Function
If you do not want to synchronize your console with PM5D Editor, select [Offline Edit] from the [Synchronization]
menu. To apply your off-line edits to your console, select [Re-Synchronize] from the [Synchronization] with the PC
-> Console option to synchronize the console with PM5D Editor.
The Offline Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the Sync window.
Some effect parameters in the console change their displayed values depending on the sampling fre-
NOTE
quency. If you switch PM5D Editor from OFFLINE to ONLINE, displayed parameter values may change
because PM5D Editor loads the sampling frequency from the console and updates the display.
Select whether the signal will be at
Select the MIX buses (MIX 1–
Select the surround mode (STEREO, 3-1,
3
PM5D Editor Owner's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pm5d-rhPm5d editor

Table of Contents