Yamaha PM5D Owner's Manual page 16

Yamaha pm5d audio mixers: owners manual
Hide thumbs Also See for PM5D:
Table of Contents

Advertisement

1
2
3
4
5
6
7
8
9
J
K
A
MIX (Send levels from the MIX channels to the MATRIX bus)
Here you can view and edit the send levels of the signals sent from each MIX channel to
the MATRIX bus. The method of operation and the meaning of the display are the same
6
as for (
) MTRX in the MIX window (➥ p.14).
B
STEREO (Send levels from the STEREO channels to the MATRIX
bus)
Here you can view and edit the send levels of the signals sent from the STEREO A/B
channels to the MATRIX bus. The method of operation and the meaning of the display
6
are the same as for (
C
Channel number
Indicates the number of the MATRIX channel corresponding to this module. You can
double-click this number to open the Selected Channel window for this channel.
D
EQ (Equalizer)
Switches the EQ on/off. The graph immediately below the button shows the approxi-
mate response of the EQ. You can drag the graph to edit the response of the EQ, or hold
down the <Ctrl> key (
it to a flat response.
E
COMP (Compressor)
Switches the compressor on/off. When the compressor is on, the GR meter immediately
below the button shows the amount of gain reduction.
F
INSERT
Enables/disables the insert-out that is patched in the PM5D's INSERT PATCH screen
(OUTPUT PATCH function).
G
DELAY
Switches the delay on/off. You can also edit the delay time by dragging the numeric
value located immediately below the button up or down
H
SELECT
Selects the MATRIX channel for which you want to make settings. This is linked with
the MATRIX [SEL] keys in the MATRIX section of the PM5D panel. However it will no
longer be linked if you turn Channel Select off (➥ p.2) in the System Setup window.
I
ON
This switches the MATRIX channel on/off. This is linked with the MATRIX [ON] keys
in the MATRIX section of the PM5D panel.
J
Fader
This adjusts the output level of the MATRIX channel. The current fader value is shown
in the numeric box immediately below the fader. The level meter at the right of the
fader shows the output level of the signal.
The numbers and alphabetical letters at the right of the fader indicate the DCA group
and mute groups to which that channel belongs, and show the Recall Safe and Mute
Safe status of the channel. (For the significance of the numbers and alphabetical letters,
see ➥ p.8).
K
CUE
This button cue-monitors the signal of the MATRIX channel. This is linked with the
MATRIX [CUE] keys in the MATRIX section of the PM5D panel.
) MTRX in the MIX window (➥ p.14).
key) of your computer keyboard and click the graph to reset
16
PM5D Editor Owner's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pm5d-rhPm5d editor

Table of Contents