Table of Contents
Advertisement
ADM-PCIE-9V8 User Manual
For pin locations, see signal name ISO_CLK in
Complete Pinout
Table.
The signal is isolated through a optical isolator part number TLP2367 with 220 ohm of series resistance.
3.10 User EEPROM
A 2Kb I2C user EEPROM is provided for storing MAC addresses or other user information. The EEPROM is part
number CAT34C02HU4IGT4A
The address pins A2, A1, and A0 are all strapped to a logical '0'.
Write protect (WP), Serial Clock (SCL), and Serial Data (SDA) pin assignments can be found in
Complete Pinout
Table
with the names SPARE_WP, SPARE_SCL, and SPARE_SDA respectively.
WP, SDA, and SCL signals all have external pull-up resistors on the card.
Page 20
Functional Description
ad-ug-1467_v1_0.pdf
Advertisement
Table of Contents
Need help?
Do you have a question about the ADM-PCIE-9V8 and is the answer not in the manual?