9.2.9. EEPROM, PCI, User IO
This register is known as CNTRL and reports information about the state of
the EEPROM interface, DMA transfer codes and general purpose input and
output bits.
Notes.
1. A fault with the EEPROM or if the EEPROM is blank will result in the Serial
EEPROM Present bit being cleared.
2. This register can be used to write and read the EEPROM for initial
programming or to perform changes to the initialisation code.
ADM-XRC-II User Manual
ADM-XRC-II User Manual
Version 1.5
Page 25
Need help?
Do you have a question about the ADM-XRC-II and is the answer not in the manual?