Table of Contents
Advertisement
5.4.53. Readout_ Type?
Enables read out of the type of data when a read-out is initiated by using the Readout
_Initiate interface Message, section 5.4.50.
Example of Use:
Readout_ Type?
enables read out of, e.g.:
R_T
Sin, 1
or
R_ T
Con , 2 . 50s , 5
or
R_
r s_o_s ,
1 . 25s , 6
If set using the examples in section 5.4.52
Notes:
When using the Start_On_Sweep parameter, the read out will change to Continuous
once triggered by the sweep starting.
5.4.54. Recorder _Mode
Sets the Recorder Mode as in Special Function 04.
Example of Use:
or
Recorder _Mode
Start_On_Sweep
- Recorder will run when sweep is running and
the pen automatically lowered at the sweep
start
Recorder _Mode
AUto
- Recorder will run at sweep up and run to
autostop at sweep down and the pen will be
automatically lowered at sweep up
5.4.55. Recorder _Mode?
58
Enables read out of the Recorder Mode status.
Example of Use:
Recorder _Mode?
enables read out of:
R_M
s_o_s
or
R_M
Auto
As set by examples in section 5.4.54.
Advertisement
Table of Contents
