Meter _Level; Meter_ Time_Constant - BRUEL & KJAER 1053 Instruction Manual

5.4.40. Meter _Level?
Enables read out of the vibration meter level as displayed on the meter when activating
the front panel Vibration Meter "Measured Level" function.
Example of Use:
Meter _Level?
enables read out of, e.g.:
M_L 1 . 87E +OOm/s/s
M_L Underload
M_L Overload
5.4.41. Meter_Time_Constant
- If the meter reading is 1 ,87 m/s
2
- If the meter indicates an underload
- If the meter indicates an overload
Sets the vibration meter time constant as in Special Function 02.
Example of Use:
Meter_ Time_Constant AUto
Meter_ Time_Constant 0 . 3
Notes:
- Sets time constant to Auto
- Sets time constant to 0,3 s
The possible settings are time constants Auto, 0,3 s, 1 s, 3 s and 10 s. Input data less than
20 will be rounded to fit one of these values without causing an error.
5.4.42. Meter_ Time_ Constant?
Enables read out of the vibration meter time constant.
Example of Use:
Meter_ Time_Constant?
enables read out of, e.g.:
M_T_C Auto
or
M_T_C 0. 3s
5.4.43. Meter _Units
- If set using the first example in section 5.4.41
- If set using the second example in section 5.4.41
Selects the unit system (between Sl or Imperial as in Special Function 01 ), used for
display and read-out of Measured Level, Set Levels and Force Level.
Example of Use:
Meter _Units Sl
- Changes to Sl units
or
Meter _Units IMperial
- Changes to Imperial units
53