Compressor _Cross_ Over; Compressor; Compressor _Max_ Speed - BRUEL & KJAER 1053 Instruction Manual

Example of Use:
Compressor _Cross_ Over _Safety
ON
- Activates the cross over safety feature
Compressor _Cross_ Over _Safety
OFf
- Deactivates the cross over safety feature
Notes:
See section 7.2 for further information.
5.4. 7. Compressor _Cross_ Over _Safety?
Enables read out of the compressor cross over safety status.
Example of Use:
Compressor _Cross_ Over _Safety?
enables read out of:
c_c_o_s on
- If activated
or
c_c_o_s
Off
- If deactivated
5.4.8. Compressor _Max_ Speed
Sets the maximum compressor regulation speed as in the front panel Compressor "Max.
Speed" function.
Example of Use:
Compressor_Max_Speed 30 - Sets the max. compressor speed to 30d8/s
Notes:
The selectable values are 1, 3, 10, . . . 1000 dB/s. Input data less than 2000 will be
rounded to fit one of these values without causing an error.
5.4.9. Compressor _Max_ Speed?
Enables read out of the maximum compressor speed.
Example of Use:
Compressor _Max_ Speed?
enables read out of, e.g.:
C_M_S 30d8/s - If set using the example in section 5.4.8.
5.4.10. Compressor _Rate
Sets the compressor regulation rate as in the front panel Compressor "Rate" function.
Example of Use:
Compressor _Rate 0. 3 - Sets the compressor rate to 0,3 dB/s/Hz
44