Frequency; Front_Panei_Enable; Front_Panei_Select - BRUEL & KJAER 1053 Instruction Manual

5.4.25. Frequency?
Enables read out of the generator frequency.
Example of Use:
Frequency?
enables read out of e.g.:
FREQ 1036 . 645Hz
- If set using example in section 5.4.24
Notes:
See Notes in section 5.4.16.
5.4.26. Front_Panei_Enable
Enables/Disables the front panel keys as in the Front Panel Setup "No." front panel
function.
Example of Use:
Front_Panei_Enable Enable - Enables the front panel keys
or
Front_Panei_Enable Disable - Disables the front panel keys
5.4.27. Front_Panei_Enable?
Enables the read out of the front panel Enable/Disable status.
Example of Use:
Front_Panei_Enable?
enables read out of:
F_P_E E
or
F_P_E D
5.4.28. Front_Panei_Select
- If enabled
- If disabled
Selects a front panel setting number as in the Front Panel Set-up "No." function on the
front panel.
Example of Use:
Front_Panei_Select 2 - Selects front panel setting no. 2
Notes:
Setting numbers 1 to 4 are possible.
If the front panel is disabled (see section 5.4.26), an error message will result.
49