BRUEL & KJAER 1053 Instruction Manual page 16

LOG DC OUTPUT:
0 to 10V (200mV/dB).
EXTERNAL FILTER IN/OUT:
8-pin DIN socket for connection to a slave
filter.
Overall Accuracy: 4%.
COMPRESSOR:
Dynamic range: 100 dB.
Rectifier: RMS.
Regulation speed: 0,1 to 1000dBs-
1
(in-
creases in proportion to frequency up to the
maximum speed).
Maximum speed: 1, 3, 10, 30, 100, 300,
1000dBs-
1 •
Rate: 0,1 - 0,3 - 1 - 3 dBs-
1
/Hz or off.
TEST PROGRAMME CONTROL:
Profile: constant force or constant
acc/vel/disp, programmed in any combina-
tion with up to eight frequency controlled
cross-over points.
Cross-over frequencies: internal calculation
of cross-over frequencies or direct setting -
cross-over frequency separation must be
>
7% of the lower cross-over frequency.
SAFETY CONTROL:
At the transition to operate, control set-up
compatibility is checked - error indication is
given for incompatibility.
Safety limits: 3, 4, 5, 6 dB or off - indepen-
dent setting of upper and lower limit.
System start-up: selectable max output level
and attenuated operating level of - 20 dB.
System shut-down: 20 dB per period of fre-
quency signal.
DIGITAL INTERFACE:
Conforms to IEEE 488 and lEG 625-1 stan-
dards.
Functions implemented:
source handshake SH 1
acceptor handshake AH 1
talker T 5
listener L 3
service request SR 1
remote local RL 1
parallel poll PP 0
device clear DC 1
device trigger DT 1
controller C 0.
Data output: generator frequency, generator
level, meter level and number of elapsed
sweeps.
Remote control: input and output of front
panel set-up (manually or remotely con-
trolled) via the digital interface.
Code: ISO 7 -bit code.
Status: besides the service request status
byte, an error code can be output to give
further information in case of an abnormal
event.
AUXILIARY:
Serial interface used to control setting of
auxiliary instruments. When connected these
act as an expansion of the front panel , both
manually and remotely controllable.
RECORDER INTERFACE:
X-Y Recorder: remote control of pen ,
up/down and X-deflection (0 to 10 V lin or log
de output).
Lin: 0 V at lower sweep limit and 1 0 V at upper
sweep limit.
Log: OV at 1Hz and 10V at 10kHz (2,5V/de-
cade).
Level Recorder: remote control of start,
stop, automatic stop and pen lift.
"ii)
Q)
::I
~
>
.¥
<0
Q)
9-
~
.¥
<0
Q)
.e:
E
Q)
E
Q)
(.)
<0
a.
VI
0
Frequency Limitations for Displacement Measurement Range
99,9mm
10mm
'\
~
~ ~
ooo
1mm
100 .um
~
'"? . . . . . .
<l',>
""
'"? . . . . . .
<l',>
10 .um
1 Hz
~
10 100
Frequency
1kHz
Frequency Limitations for Velocity Measurement Range
~
10kHz
8518 1712
~ 1m/s~------~-------+-------~~~- -------~
::I
~
>
.¥
<0
Q)
S: 1 00mm/s~------~-------+-------~-------1
0,3mm/s
0,1 mm/s
L - - - -- - - - - L . . - - - - - - - - ' - - - - - '
1 Hz 10
POWER REQUIREMENTS:
Power supply: 100, 115, 127, 200, 220 or
240 V AC
±
20%, 50/60Hz.
Consumption: 42 VA approx.
Fuse requirements: 200 mA (200 to 240 V),
400mA (100 to 127V).
ENVIRONMENTAL:
Safety: complies with lEG 348 Safety Class II .
Operating temperature:
+
5
oc
to
+
40
oc
(+ 41 ° 17 to 104 ° F).
Storage temperature: - 25
o
C to
+
70
o
C
(- 13 ° F to 158 ° F).
Humidity range: 90% RH (non-condensing at
30 ° C).
Electromagnetic compatibility: complies
with requirements for Class B computing de-
vice of American FCC (Federal Communica-
tion Commission) rules.
GENERAL:
Cabinet: supplied as model A (lightweight
metal cabinet) or C (as A but with flanges
Type KS 0023 for 19 in racks).
Height: 133 mm (5,2 in).
Width: 430mm (16,9in).
100
Frequency
1 kHz
Depth: 320 mm (12,6 in).
Weight: 10kg (221b).
ACCESSORIES INCLUDED:
10kHz
85 18 1611
1 Accelerometer ........................ ........ Type 4371
1 mains cable ......................................... AN 0020
1 UNF to TNC cable .............................. AO 0231
2 spare fuses .. ......................................... VF 0012
3 spare fuses ........................................... VF 0039
1 8-pin DIN plug ......................... ............. JP 0802
1 7-pin DIN plug .................. ............... ..... JP0703
1 6-pin DIN plug ...................................... JP0606
3 BNC plugs ........... .............................. .... JP0035
1 IEEE bus connection kit.. .................. UA 0814
ACCESSORIES AVAILABLE:
Resonance Dwell Unit... .................... Type 5885
Control Signal Selector ..... ............... Type 5686
Narrow Band Random Noise Unit .. Type 5887
Slave Filter .............................. ....... ..... Type 5888
Rack mounting flanges ........................ .. KS 0023
IEEE 488 i nterface cable (2m) ............. AO 0265
25-pin IEC625-1 to IEEE488 in-
terface cable (2m) ................................. A00264