BRUEL & KJAER 1053 Instruction Manual page 47

Header Min Code Section Action
Auto_Range A_R 5.4.1 Brings the compressor display into range and sets
the vibration meter function
Charge_ Sensitivity_ Correction
c_s_c
5.4.2 Applies an input sensitivity correction (charge only)
Charge_ Sensitivity_ Correction? C_S_C? 5.4.3 Gives the input sensitivity correction
' Compressor
c
5.4.4 Switches the compressor on or off
Compressor?
C?
5.4.5 Gives the compressor on/off status
Compressor _Cross_ Over _Safety
c_c_o_s
5.4.6 Activates/deactivates the comp. cross over safety
Compressor _Cross_ Over _Safety?
C_C_O_S?
5.4.7
Gives the compressor cross over safety status
Compressor _Max_ Speed C_M_S 5.4.8 Sets the max. compressor speed
Compressor _Max_ Speed?
C_M_S?
5.4.9 Reads out the max. compressor speed
Compressor _Rate C_R 5.4.10 Sets the compressor rate
Compressor _Rate? C_R? 5.4.11 Gives the compressor rate
Compressor _Safety _Limit C_S_L
5.4.12
Sets the compressor safety limits
Compressor _Safety _Limit?
C_S_L?
5.4.13 Gives the compressor safety limits
Cross_ Over _Calculate
c_o_c
5.4.14 Calculates the cross over frequencies
Cross_ Over _Frequency_< M) C_O_F_(M) 5.4.15 Sets the cross over frequency number M
Cross_ Over _Frequency_< M)?
C_O_F _(M)?
5.4.16
Gives the cross over frequency number M
Error? E? 5.4.17 Gives the last error number
Error_Stop
E_S
5.4.18 Selects stop/continue of data transfer on an error
Error _Stop?
E_S?
5.4.19
Gives the data transfer on error status
Externai_Filter E_F 5.4.20 Sets the vib. meter and compressor external filter
Externai_Filter?
E_F?
5.4.21
Gives the vib. meter and compressor external filter
Force_Level F_L 5.4.22 Sets the vibration meter force level
Force_Level?
F_L?
5.4.23
Gives the vibration meter force level
Frequency F 5.4.24 Sets the generator frequency
Frequency? F? 5.4.25 Gives the generator frequency
Front_Panei_Enable F_P_E 5.4.26 Enables/disables front panel
Front_Panei_Enable? F_P_E? 5.4.27 Gives front panel enable/disable status
Front_Panei_Select
F_P_S
5.4.28 Selects a front panel number
Generator _Levei_Actual G_L_A 5.4.29 Sets the actual generator level
Generator _Levei_Actual? G_L_A? 5.4.30 Gives the actual generator level
Generator _Levei_Programmed
G_L_P
5.4.31 Sets programmed generator level
Generator _Levei_Programmed? G_L_P? 5.4.32 Gives programmed generator level
Generator _Output G_O
5.4.33
Switches on/off the generator output
Generator _Output?
G_O?
5.4.34 Gives the generator output status
Identify? 10? 5.4.35 Gives instrument identification "B&K 1 053"
lnput_Sens I_S
5.4.36
Dummy Message for read in without error
lnput_Sens? I_S? 5.4.37 Gives the input sensitivity setting
T01504GB2
Table 5.2 (a). List of interface Messages available in the 1053
39