Use With Other Instruments; Operation With Analogue Recorders; X-Y Recorder Type 2308 - BRUEL & KJAER 1053 Instruction Manual

4. USE WITH OTHER INSTRUMENTS
This chapter gives all instrument interconnection details and procedures for operating
the 1053 with analogue recorders, digital recorders and Digital Stroboscope Type 4913.
For operation with the Resonance Dwell Unit Type 5885, Narrow Band Random Noise
Unit Type 5887 and Slave Filter Type 5888, the user should consult the individual Instruc-
tion Manual for each instrument. Description of each instrument is given in chapter 1.
4.1. OPERATION WITH ANALOGUE RECORDERS
For easy evaluation of vibration measurements, accurate documentation is often a pre-
requisite. The frequency response of the test object can be graphically documented
using either one of two analogue recorders: The X-Y Recorder Type 2308 and the Level
Recorder Type 2307.
4.1.1. X-Y Recorder Type 2308
26
-·-
.
Fig. 4.1. X-Y Recorder Type 2308
For hard-copy recording of vibration test responses, an instrument arrangement similar
to that shown in chapter 1, Fig. 14 can be used. This makes use of the X-Y Recorder
Type 2308. The 2308 is connected to the 1053, using cable AQ 0034, for frequency-sweep
synchronization of the 2308 by the 1053. Connection is made from the X-V Recorder
socket of the 1 053 to the Remote 1 socket of the 2308; the control of the horizontal pen
deflection is by a voltage ramp (refer to section 2.2.4.)
Both ·linear and logarithmic sweep control is possible. Set the X-ramp Sensitivity (spe-
cial parameter no.03) to "0" for logarithmic control or to "1" for linear control (refer to
section 7.2).