Led Module Vu120 (Optional) - Endress+Hauser Liquiphant FTL63 Operating Instructions Manual

Liquiphant FTL63
Endress+Hauser
Behavior of switch output and signaling
MAX
MIN
 30 Behavior of switch output and signaling, electronic insert FEL68
MAX DIP switch for setting MAX safety mode
MIN DIP switch for setting MIN safety mode
RD Red LED for alarm
YE Yellow LED, switch status
GN Green LED, operational status, device on
The Bluetooth module for use in conjunction with the electronic insert FEL68 (2-wire
NAMUR) must be ordered separately with the necessary battery.
6.3.7

LED module VU120 (optional)

Supply voltage
U = 12 to 55 V ,
DC
U = 19 to 253 V , 50 Hz/60 Hz
AC
Power consumption
P ≤ 0.7 W, S < 6 VA
Current consumption
I = 0.4 A
max
Connecting the LED module
In the case of devices for use in the hazardous area with a certain type of protection,
the cover is sealed by a securing screw.
For more details, see the "Cover with securing screw" section.
A
RD YE GN
2.2...3.8 mA
L+ 2
0.4...1.0 mA
L+ 2
2.2...3.8 mA
L+ 2
0.4...1.0 mA
L+ 2
< 1.0 mA
L+ 2
Electrical connection
1 L-
L-
1
1
L-
1 L-
1
L-
A0037694
31