Connecting The Cable - Endress+Hauser Liquiphant FTL63 Operating Instructions Manual

Electrical connection
34
Replacing the battery
‣
Before replacing the battery, the Bluetooth module must be disconnected from
electronic insert FEL68.
 Only then will the battery status display be detected correctly.
Connecting the Bluetooth module
In the case of devices for use in the hazardous area with a certain type of protection,
the cover is sealed by a securing screw.
For more details, see the "Cover with securing screw" section.
A
1 →
2.
1.
A0045097
4
1.
2.
A0045108
6.3.9

Connecting the cable

Required tools
• Flat-blade screwdriver (0.6 mm x 3.5 mm) for terminals
• Suitable tool with width across flats AF24/25 (8 Nm (5.9 lbf ft)) for M20 cable gland
2 →
A0045106
Liquiphant FTL63
3 →
A0045107
Endress+Hauser