Led Module Vu120 (Optional); Cable Entry - Endress+Hauser Liquiphant FTL51B Operating Instructions Manual

Electrical connection
30
6.2.8

LED module VU120 (optional)

 33 LED module
The bright LED display indicates the switch status or the alarm condition and can be
connected to the following electronic inserts: FEL62, FEL64, FEL64DC
Supply voltage
U = 12 to 55 V , 19 to 253 V
DC
Power consumption
U ≤ 0.7 W, < 6 VA
Current consumption
I = 0.4 A
max
Connecting the module
 34 Connecting the LED module
1. Attach the connecting cable of the LED module to the connecting cables of the supply
voltage. Use the wire end ferrules supplied.
2. Connect the wire end ferrules to the terminals of the measuring device.
3. Connect the LED module with the COM interface in the electronic insert.
6.2.9

Cable entry

Required tools
• Flat-blade screwdriver (0.6 x 3.5 mm) for terminals
• Torque spanner (8 Nm) for M20 cable gland
AC
Liquiphant FTL51B
A0039258
A0033542
Endress+Hauser