Operation Options; Plug-On Display Phx20 (Optional) - Endress+Hauser Cerabar PMP11 Operating Instructions Manual

Cerabar PMP11, PMP21, PMP23
Endress+Hauser
7

Operation options

7.1

Plug-on display PHX20 (optional)

No display or other operation facility is required to operate the device. However, devices
with a valve plug can be fitted with the optional local display PHX20.
A 1-line liquid crystal display (LCD) is used. The local display shows measured values, fault
messages and information messages. The device display can be turned in 90° steps.
Depending on the orientation of the device, it is therefore easy to read the measured
values.
7.1.1 Storage conditions
Use original packaging.
Storage temperature range: –30 to +80 °C (–22 to +176 °F)
7.1.2 Installation
Mount the plug-on display in the following order.
1. Place seals between the sensor/plug-on display and the plug-on display/connector.
2. Fit the plug-on display (2) between the connector (3) and connector socket (1) of the
sensor.
3. Replace the securing screw (4) with the longer screw included in the delivery.
4. The display can be rotated by 90°.
5. An adhesive label (included in the delivery) with information on the technical unit
can be fixed beneath the LED display.
The plug-on display is ready for operation after it is mounted.
Mounting dimensions
1 2 3
42 (1.65)
48 (1.89)
Operation options
4
A0022208
A0022210
21