Safety; Appropriate Usage - Energizer Solar Force HS-3.0 User Manual

Table of Contents

Danger.

Risk of electric shock!

Danger to life due to high voltage.

There is residual voltage in the inverter which needs 5 min to discharge.

Wait 5 min before you open the upper lid or the DC lid.

Read the manual.

Product should not be disposed as household waste.

PE conductor terminal.

2. Safety

HS/AS series inverters are designed and tested in accordance with international safety requirements.

However, certain safety precautions must be taken when installing and operating this inverter. The

installer must read and follow all instructions, cautions and warnings in this installation manual.

All operations including transport, installation, start-up and maintenance, must be carried out by

qualified, trained personnel.

The electrical installation & maintenance of the inverter shall be conducted by a licensed

electrician and shall comply with local wiring rules and regulations.

Before installation, check the unit to ensure it is free of any transport or handling damage, which

could affect insulation integrity or safety clearances. Choose the installation location carefully

and adhere to specified cooling requirements. Unauthorized removal of necessary protections,

improper use, incorrect installation and operation may lead to serious safety and shock hazards

or equipment damage.

Before connecting the inverter to the power distribution grid, contact the local power distribution

grid company to get appropriate approvals. This connection must be made only by qualified

technical personnel.

Do not install the equipment in adverse environmental conditions such as in close proximity to

flammable or explosive substances; in a corrosive or desert environment; where there is

exposure to extreme high or low temperatures; or where humidity is high.

Do not use the equipment when the safety devices do not work or are disabled.

Use personal protective equipment, including gloves and eye protection during the installation.

Inform the manufacturer about non-standard installation conditions.

Do not use the equipment if any operating anomalies are found. Avoid temporary repairs.

All repairs should be carried out using only approved spare parts, which must be installed in

accordance with their intended use and by a licensed contractor or authorized Energizer Solar

service representative.

Table of Contents