Table of Contents
Advertisement
6.4 Earth Connection
Use the crimping pliers to press the ground cable into the ground terminal, screw the ground screw with
screwdriver as shown below:
6.5 Communication Device Installation (Optional)
HS/AS series inverters are available with multiple communication options such as WiFi, LAN, 4G, RS485
and Meter with an external device.
Operating information like output voltage, current, frequency, fault information, etc., can be monitored
locally or remotely via these interfaces.
•
WiFi/LAN/4G (Optional)
The inverter has an interface for WiFi/LAN/4G devices that allow this device to collect information from
inverter; including inverter working status, performance etc., and update that information to monitoring
platform (the WiFi/LAN/4G device is available to purchase from your local supplier).
Connection steps:
1.
For LAN device: Please complete the wiring between router and LAN device (please refer to the LAN
product manual for more details).
2.
Plug the WiFi/LAN/4G device into "WiFi/LAN/4G" port at the bottom of the inverter.
3.
For WiFi device: Connect the WiFi with the local router, and complete the WiFi configuration (please
refer to the WiFi product manual for more details).
4.
Set-up the site account on the Energizer Solar monitoring platform (please refer to the monitoring
user manual for more details).
22
Advertisement
Table of Contents
