Advertisement
2
Important notes
2.1 Scope
This manual describes the assembly, installation,
commissioning, maintenance and troubleshooting of
Energizer Solar Panels.
2.2 Target Group
This manual is for qualified personnel only. The
tasks described in this manual need to be performed
by professional, suitably qualified technicians only.
2.3 Safety
Please read all the instructions in this manual
carefully before installation, as well as electrical and
mechanical requirements.
The installation and operation of photovoltaic
modules requires professional skills that only
professionals can do. The installation process is
strictly observed with all safety precautions in this
manual and the manual is kept for further reference.
At the same time, the installer must inform the end
customer (or consumer) of the above accordingly.
2.4 Purpose
This manual provides detailed instructions and
important safety precautions for the installation,
electrical
connection
single-sided Energizer Solar crystalline silicon
photovoltaic modules (hereinafter referred to as
photovoltaic modules). This document applies to
photovoltaic module types listed below.
ENSP54M2xxx
ENSP60M1xxx
ENSP54MBL2xxxBF
ENSP60M2xxxBF
ENSP54N2xxxBF
ENSP60MBL2xxx
ENSP54NBL2xxxBF
ENSP60M3xxx
ENSP60N2xxx
ENSP60NBL2xxxBF
ENSP60N3xxx
ENSP66M3xxx
Table 1: Photvoltaic module types.
8 Star Energy Pty Ltd | Level 35, 477 Collins Street, Melbourne VIC 3000 | https://www.energizersolar.com
3
8 Star Energy ESS Ltd | The Black Church, St Mary's Place, Dublin DO7 P4AX, Ireland
and
maintenance
ENSP72M1xxx
ENSP72M2xxx
ENSP72N2xxxSI
ENSP72NBL2xxx
ENSP78N2xxx
2.5 Limitation of Liability
Since the use of this manual and the installation,
operation, use and maintenance of photovoltaic
modules are beyond the control of 8 Star Energy
Proprietary Limited (hereafter "8 Star Energy"), this
manual does not have any warranty meaning,
whether express or implied. 8 Star Energy will not be
responsible for any form of injury, including, but not
limited to, damage, loss of life or additional expenses
caused by incorrect installation, operation, use and
maintenance of photovoltaic modules and systems.
Energizer Solar reserves the right to update this
manual
without
inconsistencies in the descriptions between different
language versions of this manual, the English
version will prevail.
3
Laws and regulations
The
mechanical
photovoltaic modules should be carried out in
accordance with applicable laws and regulations,
including electrical law, building law and electrical
connection requirements. These regulations vary
depending on the installation location, such as the
roof of the building, the surface of the water, etc., or
may vary depending on the installation system
of
voltage, dc usage, or AC. Please contact your local
authority for specific terms.
4
Safety measures
Energizer Solar modules are designed to meet
•
the requirements of IEC 61215 and IEC 61730,
and have been qualified for application class A
(equivalent to Safety Class II requirements).
Modules rated for use in this application class
•
may be used in system operating at greater
than 50V DC or 240W, where general contact
access is anticipated. The module complies
with IEC61730 and UL61730 standards and
meets Class C fire rating (IEC61730), and type
4 fire rating (UL61730).
prior
notice.
If
there
and
electrical
installation
are
of
Advertisement
