Energizer Solar Force HS-3.0 User Manual page 33

Notes:
1.Under On-grid mode, please ensure that the EPS loads power is lower than the inverter's maximum
Bypass power.
2.Under Off-grid mode, ensure that the EPS loads power is lower than the inverter's maximum EPS power.
3. We suggest not connect the inductive loads on EPS port.
B. Common loads description
Under EPS mode, if need to connect the inductive load on EPS port, please ensure that the instantaneous
power of the load at startup is lower than the maximum power of the EPS mode. Below table shows some
conventional and reasonable loads for you reference. Please refer to your loads' manual for the actual
specs.
32