Troubleshooting - LawnMaster VBRM601YCM Operator's Manual

TROUBLESHOOTING

Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore, check the product using this section. In most cases the problem can be solved quickly.
WARNING
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorized service center
or a similarly qualified specialist if you cannot solve the problem yourself!
Gloves and appropriate protective clothing must be worn when performing these instructions. Always
turn off the mower before making any adjustment.
PROBLEM
The robotic lawn
mower is stuck
during mowing.
The robotic lawn
mower fails to start.
POSSIBLE CAUSE
Grass or other debris is wrapped
around the wheels.
Grass or other debris is wrapped
around the blade disc.
The blade disc is submerged in
water.
The robotic mower has got
caught in something.
The robotic mower is stuck
behind a number of obstacles.
The mower is stuck in an uneven
dip or hole in the lawn.
The lift sensor has been activated
as the mower has become
trapped.
The safety key is not installed
correctly/fully.
The battery is not installed
correctly.
The battery is not fully charged.
Possible clogging.
Check wheels and remove the grass or
objects.
Check the blade disc and remove the
grass or objects (always wear gloves).
Move the robotic mower and prevent the
collection of water in the working area.
Free the mower and remove the obstacle.
Check if there are any obstacles which
make it hard for the robotic mower to
move on from this location. Remove the
obstacles.
Ensure that dips and holes in the lawn are
leveled with topsoil and over-seeded with
grass seed.
Free the mower.
Install the safety key correctly.
Ensure the battery is correctly installed.
Charge the battery.
Remove the safety key and battery.
Check underneath the mower and clear
as necessary (always wear gloves).
35
SOLUTION