LawnMaster VBRM601YCM Operator's Manual page 4

Mx 24v lithium-ion robotic lawn mower
Table of Contents

Advertisement

SPECIFICATIONS
NOISE EMISSIONS MEASURED IN THE ENVIRONMENT AS SOUND POWER
Sound Power Level (L
Noise Emissions Uncertainties K
Sound Power Level (L
Sound Pressure Level (L
The noise emission declarations conforms to EN 50636-2-107:2015
Noise emissions in the environment measured as sound power (L
2000/14/EC. The guaranteed sound power level includes variation in production as well as variation
from the test code with 1-3 dB(A).
Sound pressure noise uncertainties KpA, 2-4 dB (A)
ABOUT THIS PRODUCT
Thank you for choosing the LawnMaster
independently mow the lawn in a random pattern without the use of a boundary wire and charging
station and will operate during daylight hours only. The mower detects grass in order to know where
to mow, and is also equipped with ultrasonic sensors which detect higher obstacles such as shrubs
and fences. For successful operation, the lawn must be defined with flat borders such as paving, or
raised edges. When the mower does not detect grass or encounters an obstacle, it changes route in
a random manner and starts mowing again in a new direction. The mower can be moved around to
different lawn areas provided that they are defined as described in this instruction manual.
The mower uses a detachable MX 24V battery which is compatible with all products in the
®
LawnMaster
24V range. It is designed to be used once or twice a week for several hours, and then
stored away in a garage or shed until it is needed again. It will mow approximately 1076 sq. ft /
2
0.025 acres (100 m
may impact performance, it is therefore important to maintain a regular mowing schedule to keep on
top of growth and develop a neat lawn finish.
FIRST OPERATION
The VBRM601YCM is designed to detect grass and move into areas it identifies as grass. If it cannot
see a clear boundary it will continue to move into areas off the lawn and into plants that it may identify
as grass. Trimming the lawn edge with a grass trimmer before use will help define a better lawn
edge. During first operation on a new lawn it is important to monitor the robot as it detects edges to
see where the boundary definition needs to be improved. Please do read the instructions fully; our
instructions have been written to help you to get the best results and also provides useful ideas for
temporary boundaries as well as examples of how to define a better lawn edge in all seasons.
FOR YOUR SAFETY: CAREFULLY READ AND UNDERSTAND ALL INSTRUCTIONS.
) Measured
WA
WA
) Guaranteed
WA
) at the Operator's Ear
PA
) on a single charge depending on lawn conditions. Excessively long or wet grass
®
VBRM601YCM robotic lawn mower. This mower will
4
) in conformity with EC directive
WA
64 dB(A)
3 dB(A)
68 dB(A)
57 dB(A)

Advertisement

Table of Contents
loading

Table of Contents