LawnMaster VBRM601YCM Operator's Manual page 16

ASSEMBLY
To install the battery pack:
1. Lift the battery compartment cover.
2. Align the support rails located within the battery compartment with the guides in the battery pack, and then
insert the battery pack into the compartment (Fig. 1).
3. Push the battery pack until you hear a "click".
4. Insert the safety key into the keyholes located near the battery compartment (Fig. 2).
NOTE: The safety key only fits into the keyholes in one direction. Do not force it.
5. Close the battery compartment cover.
NOTE: Make sure that battery pack firmly snaps into place and is secured to the mower before starting
operation.
To remove the battery pack:
1. Stop the lawn mower. Lift the battery compartment cover and remove the safety key.
2. Press and hold the release button on the battery pack (1), grasp the battery pack firmly and pull out (2) of
the battery compartment (Fig. 3).
3. Close the battery compartment cover.
Fig. 1
1
2
Fig. 3
16
Fig. 2