Troubleshooting - LawnMaster CLMF4817E Operator's Manual

TROUBLESHOOTING

Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore check the product using this section. In most cases the problem can be solved quickly.
WARNING
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorized service center
or a similarly qualified specialist if you cannot solve the problem yourself!
Problem
Mower fails to start.
Mower cuts unevenly.
Mower does not mulch
properly.
Possible Cause
The safety key is not
installed.
The batteries are not
installed correctly.
The batteries are not
charged or power is too
low.
The blade is jammed.
The batteries are defective
or old.
The switch is defective.
Rough or uneven lawn.
Cutting height not set
properly.
The blade is dull.
Wet grass clippings
sticking to the underside of
the deck.
Install the safety key securely.
Check connection of batteries to mower.
Charge the batteries.
Stop mower and remove batteries;
check for grass and debris under the
deck, clean to make blade free to move.
Replace the batteries (call the toll free
helpline, at 866-384-8432).
Replace the switch (call the toll free
helpline, at 866-384-8432).
Check the mowing area.
Set the mower at a higher position.
Sharpen or replace the blade.
Wait until the grass dries before mowing.
32
Solution