Troubleshooting - LawnMaster GVB1316 Operator's Manual

TROUBLESHOOTING

Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore, check the product using this section. In most cases the problem can be solved quickly.
WARNING
Only perform the steps described within these instructions!
If further assistance is required, please call Customer Service at 866-384-8432. All further inspection,
maintenance and repair work must be performed by an authorized service center.
PROBLEM
Tool does not start.
Abnormal noises, clatter
or vibrations.
POSSIBLE CAUSE
No power.
Defective power cord.
Safety switch button is not
pressed.
Start/stop bale switch
defective.
Carbon brushes worn out.
Motor defective.
Foreign object in the
cylinder.
Damaged spring tines or
cylinder knives.
Cylinder incorrectly
mounted.
Toothed-belt slip.
Check power socket, cord, line; repair
only by qualified electrician.
Call Customer Service for assistance
(Toll-free number 866-384-8432).
Press and hold the safety switch button.
Pull the start/stop bale switch toward the
handle and release the safety switch button.
Call Customer Service for assistance
(Toll-free number 866-384-8432).
Remove the foreign object .
Exchange the cylinder.
Install the cylinder correctly. See
Changing the Cylinder on page 18.
Call Customer Service for assistance
(Toll-free number 866-384-8432).
23
SOLUTION