Table of Contents
Advertisement
TROUBLESHOOTING
No charging
procedure possible.
The charge control
LEDs do not light up
after inserting the
mains plug into the
socket.
For more status of the indicator lights on battery & charger, refer to page 17 & 18.
The battery contacts are
contaminated.
Socket outlet, mains cable or
battery charger are defective.
The battery has a fault.
Mains plug of the battery charger
is not plugged in properly.
Socket outlet, mains cable or
battery charger are defective.
Clean the battery contacts (e.g. by
inserting and removing the battery several
times) or replace the battery.
Check the mains voltage. If necessary,
contact Customer Service.
Replace the battery.
Insert mains plug fully into the socket
outlet.
Check the mains voltage and if necessary,
contact Customer Service.
39
Advertisement
Table of Contents
