Troubleshooting - LawnMaster CLMF4819A Operator's Manual

TROUBLESHOOTING

Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore check the product using this section. In most cases the problem can be solved quickly.
WARNING
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorized service center
or a similarly qualified specialist if you cannot solve the problem yourself!
Problem
Mower fails to start.
Mower cuts unevenly.
Mower does not mulch
properly.
Possible Cause
The key is not installed.
The batteries are not
installed correctly.
The batteries are not
charged or power is too
low.
The switch is defective.
The blade is jammed.
The batteries are defective
or old.
Rough or uneven lawn.
Cutting height not set
properly.
The blade is dull.
Wet grass clippings
sticking to the underside of
the deck.
Missing mulching plug.
Check the key installation.
Check connection of batteries to mower.
Charge the batteries.
Call the toll free helpline, at 866-384-
8432.
Stop mower and remove batteries;
check for grass and debris under the
deck, clean to make blade free to move.
Replace the batteries (call the toll free
helpline, at 866-384-8432).
Check the mowing area.
Set the mower at a higher position.
Sharpen or replace the blade.
Wait until the grass dries before
mowing.
Install the mulching plug.
33
Solution