LawnMaster VBRM601YCM Operator's Manual page 27

OPERATION
2. Within 10 seconds, enter a four-digit number of your choice with the 1-4 Buttons to use as your
personal security code. Press the STOP button to confirm. The UNLOCK Indicator is green
flashing.
3. Within 10 seconds, enter the four-digit number of your security code again. Press the STOP button
to confirm. The UNLOCK Indicator is green continuous. The security code is set successfully.
NOTE: If more than four digits are entered, you will hear five beeps. The mower returns to the no
security code state. The UNLOCK Indicator is turned off. Re-start from the first step to set the security
code.
NOTE: When the control panel is not operated for 10 seconds during the security code setting, the
mower will return to the no security code state automatically.
To turn off the security code function:
1. Unlock the mower by entering the correct security code and pressing the STOP button to confirm.
You will hear two beeps and the UNLOCK Indicator is green continuous.
2. Press and hold down the Spiral Mow Button (Security Setting Button 2) and START/ON button
(Security Setting Button 4) simultaneously for 3 seconds. The UNLOCK Indicator is turned off. The
security code function is turned off successfully.
To change the security code:
1. Unlock the mower by entering the correct security code and pressing the STOP button to confirm.
2. Press and hold down the Auto Mow Button (Security Setting Button 3) and START/ON button
(Security Setting Button 4) simultaneously for 3 seconds. You will hear two beeps and the UNLOCK
Indicator is red continuous. The mower is ready for changing the security code.
3. Within 10 seconds, enter a new security code. Press the STOP button to confirm. The UNLOCK
Indicator is green flashing.
4. Within 10 seconds, enter the new security code again. Press the STOP button to confirm. The
UNLOCK Indicator is green continuous. The new security code is set successfully.
NOTE: If more than four digits are entered, you will hear five beeps. The mower returns to the locked
state. The UNLOCK Indicator is red flashing. Re-start from the first step to change the security code.
SWITCHING ON/OFF
1. To switch on, press the START/ON button for 1 second. The battery indicator,
error indicator, ultrasonic indicator will flash consecutively. The camera system
will take approximately 15 seconds to start up.
NOTE: Please wait while the mower starts up, attempting to start the mower in this time will cause an
error warning and the start-up process will need to be repeated.
2. The mower is ready to mow when the battery indicator is illuminated green continuously and the
mower beeps.
3. To switch off the mower, lift the battery compartment cover and remove the safety key.
STARTING/STOPPING THE MOWER
WARNING
Do not allow familiarity with products to make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
27