LawnMaster VBRM16 Instruction Manual

LawnMaster VBRM16 Instruction Manual

6cm mx 24v lithium-ion cordless robotic lawnmower 24v lithium-ion cordless grass trimmer
Hide thumbs Also See for VBRM16:

Advertisement

Instruction Manual
16cm MX 24V Lithium-Ion Cordless Robotic Lawnmower VBRM16
Original Instructions
WARNING:
Read all safety instructions carefully before assembling and operating
this machine. Ensure the machine has been assembled correctly and safely. Keep the
instructions safe and pass them on to any subsequent user so that the information is always
available.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VBRM16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LawnMaster VBRM16

  • Page 1 Instruction Manual 16cm MX 24V Lithium-Ion Cordless Robotic Lawnmower VBRM16 Original Instructions WARNING: Read all safety instructions carefully before assembling and operating this machine. Ensure the machine has been assembled correctly and safely. Keep the instructions safe and pass them on to any subsequent user so that the information is always...
  • Page 3 Fig. 1 Fig. 2 >6 cm >6 cm >6 cm Fig. 3 Fig. 4 Fig. 5 Fig. 6...
  • Page 4: Table Of Contents

    ® Thank you for choosing the LawnMaster VBRM16 robotic lawnmower. This mower will independently mow the lawn in a random pattern without the use of a boundary wire and charging station and will operate during daylight hours only. The mower detects grass in order to know where to mow, and is also equipped with ultrasonic sensors which detect higher obstacles such as paving, or raised edges.
  • Page 5: Symbols

    SYMBOLS The following warning symbols appear throughout this manual and indicate the appropriate safety measures you should take when operating and maintaining the appliance. SYMBOL DESIGNATION/EXPLANATION WARNING - The robotic lawnmower can be dangerous if used incorrectly. Read instruction manual before operating the machine. Keep bystanders away.
  • Page 6 SYMBOLS SYMBOL DESIGNATION/EXPLANATION Only recharge battery packs with the supplied charger indoors. Fuse Electrical appliances must not be disposed of with the domestic waste. Batteries contain Lithium-ion. Do not dispose of batteries in household waste. Li-ion Do not dispose of battery packs in rivers or immerse in water. Do not subject the battery to direct sunlight over long periods and do not leave it Recycle electrical waste products in an environmentally safe way where facilities exist.
  • Page 7: Safety Information

    SAFETY INFORMATION IMPORTANT! REFERENCE Training and the proper use of the machine. children to use the machine. Local regulations may restrict the age of the operator. occurring to other people or their property. neighbours about the risks. Keep a safe distance from the machine when operating.
  • Page 8 SAFETY INFORMATION WARNING Never use the robotic lawnmower when people, especially children or pets, are in the cutting area. Preparation Area. used and remove all stones, sticks, wires, pet toys, and other foreign objects. bolts and cutting assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
  • Page 9 SAFETY INFORMATION - Before checking, cleaning or working on the machine. conditions especially when there is a risk of lightning. lawn. people or animals to sit on the mower. Ensure that the mower and the sprinkler system do not operate at the same time. Do not wash the mower with running water and do not immerse it in water.
  • Page 10 SAFETY INFORMATION Maintenance and storage machine is in safe working condition. used. contact with the eyes, etc. manufacturers’ instructions. the isolator key and the battery pack and check for any damage of the blade. Replace a worn or damaged blade to preserve balance.
  • Page 11 SAFETY INFORMATION Transportation to carry the mower at the front and rear sections under the mower. Carry the mower with the blade disc away from the body. battery pack. packaging to avoid damage during transportation over long distances. Battery Safety Information manufacturer.
  • Page 12 SAFETY INFORMATION ignition, such as a pilot light. An exploded battery can propel debris and chemicals. If this rule will reduce the risk of electric shock. leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets minutes, then seek immediate medical attention.
  • Page 13 SAFETY INFORMATION Always use a dry cloth when cleaning. Never use brake to clean battery pack. Charger Safety Information cool and well-ventilated environment. which could cause shorting and electric shock. If damaged, immediately discontinue use. Replace the charger with the manual.
  • Page 14 SAFETY INFORMATION parts. Damaged or entangled cords increase the risk of electric shock. sharp blow. plate must correspond to the mains voltage of the power source. Product End of Use correctly at the end of their life to prevent waste electrical and to protect and improve the quality of the environment.
  • Page 15: In The Box

    IN THE BOX (Refer to Page 2) 1. Carry Handle 11. Front wheel 2. Cutting Height Adjustment Knob 13. Blade Disc 5. Ultrasonic Object Sensors 6. Grass Detection Camera 7. Rear Wheel 16. Battery Release Button 8. Battery Compartment Cover 9.
  • Page 16: Assembly

    ASSEMBLY Preparation Prepare the Mowing Area (See Figs. 1-2) Lawn Surface operation of the mower. Clear leaves at regular intervals and repair dead patches with grass seed. pools of water on the lawn and to prevent mower from becoming stuck. The mower may be NOTE: This mower is not designed to cut excessively long or overgrown and neglected areas.
  • Page 17 ASSEMBLY When the robotic mower detects that there is no grass or encounters an obstacle, it changes route in a random manner and starts mowing again in a new direction. To allow the robotic mower to move freely inside the lawn, the lawn must be properly checked and adjusted so that the robotic area.
  • Page 18 case, garden canes are particularly effective and do not detract from the look of the lawn. In spring, lawn around the area spaced at 20 cm. The mower will be physically prevented from entering any protected areas. Obstacles in the mowing area With the ultrasonic sensors on, objects which do not impede the robotic mower’s normal functioning, When objects, such as exposed tree roots, exposed wires, irrigation systems, etc., are present on the surface of the lawn, it is required to protect these objects with paving, walls or barriers to prevent...
  • Page 19 ASSEMBLY Install/Remove the Battery Pack (See Figs. 13-15) WARNING If any parts are broken or missing, do not attempt to attach the battery pack to the robotic mower or operate the robotic mower until the broken or missing parts are replaced. Failure to do so could result in serious injury.
  • Page 20: Operation

    OPERATION Control Panel (See Fig. 16) Spot Cutting Button to start mowing. Battery Indicator Battery Indicator Status Green, Continuous Red, Continuous Recharge required. The temperature of battery pack is abnormal, or the electric Red, Flashing core fault. Auto Mow Button Error Indicator Error Indicator Status...
  • Page 21 OPERATION Switching On/Off will take approximately 15 seconds to start up. NOTE: an error warning and the start-up process will need to be repeated. mower beeps. Starting/Stopping the Mower WARNING Read the safety instructions carefully before you start your robotic lawnmower. WARNING Keep your hands and feet away from the rotating blades.
  • Page 22 OPERATION Cutting Modes Auto Cutting In Auto cutting mode, the robotic mower will mow the lawn in a random pattern. After the robotic mower is powered on, press the Auto Mow Button for 2 seconds. Then press blades have started to spin. The robotic lawnmower will automatically search for a suitable working area.
  • Page 23 OPERATION USING A CUTTING HEIGHT THAT IS TOO LOW IN LONGER GRASS WILL USE MORE POWER AND REDUCE BATTERY RUN TIME. Battery Pack Operation Battery Charging WARNING Use only with 24LFC12 battery charger approved by the manufacturer. Check the power voltage! Battery chargers operate on 220-240V AC. life.
  • Page 24 OPERATION Charger Operation (See Fig. 18) WARNING 24LB2004, 24LB2004-C. If any part of the charger is missing or damaged, do not operate it! Replace the charger with a new one. Failure to pay attention to this warning could result in possible serious injury. Check the voltage! The voltage must comply with the information on the rating label.
  • Page 25 OPERATION battery charger will automatically switch to charging. the battery pack. If the LED status repeats a second time, try to charge another identical battery. After continuous or repeated charging cycles without interruption, the charger may warm up. This is normal and does not indicate a technical defect of the battery charger.
  • Page 26: Maintenance

    MAINTENANCE WARNING Always switch the product off, remove the isolator key and the battery pack and let the product cool down before performing inspection, maintenance and cleaning work. WARNING If a part becomes worn or damaged, use manufacturers recommended replacement parts. Use of WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product.
  • Page 27 MAINTENANCE To replace the blades in place. This ensures the blade disc is not turning when replacing the blades to avoid personal injury. Cleaning the Underside It is recommended to check and clean the underside of the robotic mower regularly. mower.
  • Page 28 MAINTENANCE sunlight. store the battery pack in direct sunlight. Updating the Software (See Fig. 21) The software of the mower can be updated if necessary. NOTE: NOTE: the software. drive device. the robotic mower is powered on completely indicated by a green battery light and beep. Insert indicator will be green continuous.
  • Page 29: Troubleshooting

    TROUBLESHOOTING WARNING Only perform the steps described within these instructions! All further inspection, maintenance and Gloves and appropriate protective clothing must be worn when performing these instructions. Always turn off the mower before making any adjustment. For the latest information on where to purchase parts please visit www.cleva-europe.com.
  • Page 30 TROUBLESHOOTING The grass is too long. Set a higher cutting height. The battery is defective. Replace the battery. Contact the After Sales Helpline. Incorrect barriers are used for Make improvements or temporary barriers if necessary. Refer to the The robotic lawnmower runs outside working area.
  • Page 31 TROUBLESHOOTING Recharge the battery to mow the Working area is too big. area twice or purchase an additional area. Replace all the blades and screws. Refer to Replacing the Mower Blade Grass is being cut Blades are dull. section on page 26-27. Visit www. unevenly.
  • Page 32 TROUBLESHOOTING The robotic lawnmower has been tilted for a prolonged time in one direction. Remove and re-insert the isolator key. Remove any obstacles. Restart the The rear wheels have been lifted mower. due to an obstacle. Error indicator is yellow continuous. The mower has fallen over.
  • Page 33 TROUBLESHOOTING The battery contacts are inserting and removing the battery contaminated. No charging Check the mains voltage and fuse. Socket outlet, fuse, mains cable procedure possible. If necessary, contact the After Sales or battery charger are defective. Helpline. The battery has a fault. Replace the battery.
  • Page 34: Technical Data

    TECHNICAL DATA DIMENSIONS Length 42.5 cm Width 35 cm Height 22 cm 5.9 kg MOWING Voltage 24 V No Load Speed Cutting System Cutting Width 16 cm Cutting Height Adjustment 40 W±20 % Maximum Slope for Cutting Area 100 m 180 min CHARGER Model No.
  • Page 35: Recycling And Disposal

    TECHNICAL DATA NOISE EMISSIONS MEASURED IN THE ENVIRONMENT AS SOUND POWER Noise Emissions Uncertainties K RECYCLING AND DISPOSAL This marking indicates that this product should not be disposed with other household wastes. The machine must be delivered in rigid packaging to avoid damage during transportation.
  • Page 38 Fig. 7 Fig. 8 Fig. 9 Fig.10 35 cm Max. 35% slope 100 cm Fig.11 Fig.12...
  • Page 39 Fig.13 Fig.14 Fig.15 Fig.16 Fig.17 Fig.18 Fig.21 Fig.19 Fig.20...
  • Page 40 VBRM16 www.cleva-europe.com...
  • Page 41 Instruction Manual 24V Lithium-ion Cordless Grass Trimmer CLGT2425T Original Instructions WARNING: Read all safety instructions carefully before assembling and operating this machine. Ensure the machine has been assembled correctly and safely. Keep the instructions safe and pass them on to any subsequent user so that the information is always available.
  • Page 43 Fig.1 Fig.2 Fig.3 Fig.4...
  • Page 44 TABLE OF CONTENTS Section Page Symbols Safety Information 7-13 In the Box Assembly Operation 15-20 Maintenance 21-22 Troubleshooting 23-24 Technical Data Recycling and Disposal...
  • Page 45: Symbols

    SYMBOLS The following warning symbols appear throughout this manual and indicate the appropriate safety measures you should take when operating and maintaining the appliance. SYMBOL DESIGNATION/EXPLANATION Caution Read instruction manual. Keep bystanders away. Do not expose to rain. Wear eye protection. Wear hearing protection.
  • Page 46 SYMBOLS SYMBOL DESIGNATION/EXPLANATION Do not dispose of battery packs in rivers or immerse in water. Do not subject the battery to direct sunlight over long periods and do not leave Recycle electrical waste products in an environmentally safe way where facilities exist.
  • Page 47: Safety Information

    SAFETY INFORMATION WARNING Read the instructions carefully. Be familiar with the controls and the correct use of the appliance. Personal Safety capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 48 SAFETY INFORMATION Check for alignment of moving parts, binding of moving parts, breakage of parts, mountings and any other conditions that may affect its correct operation. Do not use the tool if any parts are damaged or defective. Have any damaged or defective parts repaired or replaced by a When not in use, tools should be stored in a dry, safe place out of the reach of children.
  • Page 49 SAFETY INFORMATION is designed only to be used with nylon cutting line. made for this machine by the manufacturer. Failure to do so can result in personal injury. out any maintenance or cleaning work, and while the product is not in use or storage. trimmer.
  • Page 50 SAFETY INFORMATION cutting line never comes into contact with the operator’s body, especially hands and feet. away from the user. wire or other foreign bodies before operating the trimmer. Battery Safety Information manufacturer. A charger that is suitable for one type of another battery pack.
  • Page 51 SAFETY INFORMATION leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets minutes, then seek immediate medical attention. other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.
  • Page 52 SAFETY INFORMATION which could cause shorting and electric shock. If damaged, immediately discontinue use. Replace the charger with the manual. If the power cord for this equipment is damaged, it must be replaced by the manufacturer, a customer service prevent hazards. outlets will reduce the risk of electric shock.
  • Page 53: In The Box

    SAFETY INFORMATION Intended Use not for any commercial trade use. It must not be used for any purposes other than those described. Any use of the machine that deviates from its intended use and is not included in these instructions is considered unauthorised use and relieves the manufacturer from his or her legal liability.
  • Page 54: Assembly

    ASSEMBLY Assembly Preparation includes suitable personal protective equipment. Assembling the Handle Shafts Attaching the Auxiliary Handle too tight, turn the handle adjustment knob anti-clockwise to loosen. Do not use excessive force Fitting the Safety Guard WARNING with the blade. Failure to avoid contact can result in serious personal injury. Installing and Removing the Battery Pack trimmer.
  • Page 55: Operation

    OPERATION Battery Pack Operation Battery Charging WARNING life. Protect the battery from heat, from continuous exposure to sun and keep away from radiation or other heat sources. Do not leave the battery in the mower in direct sunlight over long periods. The battery is supplied partially charged.
  • Page 56 OPERATION Charger Operation WARNING one. Failure to pay attention to this warning could result in possible serious injury. power supply. NOTE: charging process. If the battery does not charge properly, check to make sure the electrical outlet The indicator lights on the charger show the charging status: Symbol Indicator Lights Status...
  • Page 57 OPERATION battery charger will automatically switch to charging. After continuous or repeated charging cycles without interruption, the charger may warm up. This is normal and does not indicate a technical defect of the battery charger. WARNING To operate the appliance, wear suitable clothing, eye and ear protection. Prior to every use, check that the appliance is operative.
  • Page 58 OPERATION The trimming line extends automatically during every starting process. For the correct functioning of the automatic line extension mechanism, the spool must stop completely before you restart the trimmer. If the trimming line is initially longer than the cutting diameter, it is automatically shortened to the right length by the line cutting blade.
  • Page 59 OPERATION Pivoting Head Edging NOTE: The lower shaft can be twisted when edging. Adjust the angle of the trimmer head according to the intended operation. WARNING Plant Protector WARNING Only adjust the plant protector position when the product is switched off and the trimmer head is at a complete stop.
  • Page 60 OPERATION NOTE! discharge of grass clippings. switched off and the battery removed. sensitive bark, and damage fence posts. not come into contact with them. Use the plant protector to ensure that the cutting device does...
  • Page 61: Maintenance

    MAINTENANCE General Maintenance solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean, dry cloths to remove dirt, dust, oil, grease, etc. with a dry cloth occasionally. Do not use water as this may damage any electrical components. Storage cutting device with a soft, dry brush.
  • Page 62 MAINTENANCE WARNING Before replacing the spool line, make sure the battery is removed from the trimmer. The line cutting blade, located on the safety guard is sharp. Take extra care and wear protective gloves. the spool. Ensure the line is not held in the parking slot on the spool before replacing the spool in the corresponding recesses of the trimmer head.
  • Page 63: Troubleshooting

    TROUBLESHOOTING WARNING WARNING PROBLEM POSSIBLE CAUSE SOLUTION The battery pack is not properly Insert the battery pack properly. inserted. The battery pack is discharged. Remove and charge the battery pack. The product doesn’t start. The battery pack is damaged. Contact the After Sales Helpline. Other electrical defect to the Contact the After Sales Helpline.
  • Page 64 TROUBLESHOOTING The battery contacts are inserting and removing the battery contaminated. No-charging procedure Check the mains voltage and fuse. Socket outlet, fuse, mains cable possible. If necessary, contact the After Sales or battery charger are defective. Helpline. The battery has a fault. Contact the After Sales Helpline.
  • Page 65: Technical Data

    TECHNICAL DATA 24V Grass Trimmer Cutting Width 25cm Speed 9200/min 3.4m/s 1.5mm 1.8kg CHARGER Model No. Charger Input Charger Output 0.5kg Weight of Charger Insulation Protection of Charger BATTERY Model No. Capacity of Battery 4.0Ah Battery Type Weight of Battery 0.7kg...
  • Page 66: Recycling And Disposal

    RECYCLING AND DISPOSAL This marking indicates that this product should not be disposed with other household wastes. The machine must be delivered in rigid packaging to avoid damage during transportation. The packaging and the machine itself are manufactured from recyclable materials and should be disposed of accordingly.
  • Page 68 Fig.6 Fig.5 Fig.7 0° 90° Fig.9 Fig.10 Fig.8 Fig.11 Fig.12 Fig.13 Fig.14 Fig.15 Fig.16 Fig.18 Fig.17 Fig.19 Fig.20...
  • Page 70 8 Ting Rong Street, Suzhou Industrial District 215122 Suzhou, Jiangsu Province, P.R.C www.cleva-europe.com...

This manual is also suitable for:

Clgt2425t

Table of Contents