Table of Contents
Advertisement
OPERATION
magnetic strips, so that the robotic mower can travel through without difficulty (Fig. 12).
3. Make sure that the outer boundary of the mowing area is defined by an optical or physical
separation.
4. Fasten the magnetic strip to the ground with the supplied magnetic strip pegs spaced 39.37'' (1 m)
apart.
Obstacles in the Mowing Area
With the ultrasonic sensors on, objects which do not impede the robotic mower's normal functioning,
such as trees (without raised roots), vertical poles, etc., do not require excluding from the mowing area
(Fig. 13).
When objects, such as exposed tree roots, exposed wires, irrigation systems, drains, etc., are present
on the surface of the lawn, it is required to protect these objects with paving, walls or barriers to
prevent the damage to them and to the robotic mower (Fig. 14).
The working area cannot be defined by holes or ditches. Ensure that there are no objects such as
toys, work tools, small stones, branches, or sprinklers, etc., on the lawn or protruding from the ground
which could impede the mower or cause damage to the blade (Fig. 15).
NOTE: Avoid leaves accumulating on the lawn, as they may not be detected correctly by the robotic
mower. Remove leaves at regular intervals.
>47.24''
Fig. 12
Fig. 13
23
Fig. 14
Advertisement
Table of Contents
