Function Test During Commissioning; Using The Chip Card - Pilz PNOZ m B0.1 Operating Manual

Commissioning
7.5

Function test during commissioning

7.6

Using the chip card

Make sure that you do not bend the chip card as you insert it into the chip card slot.
To remove the chip card, press on the chip card and then pull it out.
Operating Manual PNOZ m B0.1
1005720-EN-04
CAUTION!
It is essential to check that the safety devices operate correctly
– after the chip card has been exchanged
– after a project has been downloaded
– when the project has been deleted from the base unit's memory ("Re-
set Project" menu)
NOTICE
The chip card contact is only guaranteed if the contact surface is clean and
undamaged. For this reason please protect the chip card's contact surface
from
– Contamination
– Contact
– Mechanical impact, such as scratches.
NOTICE
Switch off the product before inserting or exchanging the chip card.
| 24