Table of Contents
Advertisement
Operation
Error messages
NUMERIC FAULT
ANALOG INPUTSIGNAL FAULTY
ANALOG MEASUREMENT ERROR
MEASURING RANGE VIOLATION
8.2.4
Error stack on the LC display
The error stack can be read from the PNOZmulti Configurator or shown on the LC display.
The error stack helps Pilz technical support with fault diagnostics. The error stack can store
up to 64 status and error messages.
The following information is shown on the LC display:
}
Sequential number of an error stack entry. A new error stack entry is stored in first place.
}
Error class (EC) and error information (EI)
}
Error number (EN) and five error parameters (PA)
Procedure for displaying the error stack on the LC display:
}
Use the rotary knob to display the error stack.
X3
X1
X2
X4
Procedure for reading the error stack with the PNOZmulti Configurator:
}
See online help for the PNOZmulti Configurator
Operating Manual PNOZ m B0.1
1005720-EN-04
...
T T
M
INFORMATION
Use the rotary knob to exit the error stack.
Error
A violation of the numeric value range was
identified on an analogue module.
A violation of the workspace was identified
on an analogue current input on an ana-
logue module.
A measurement error was identified on an
analogue current input on an analogue
module.
A violation of the measuring range was
identified on an analogue current input on
an analogue module.
Show
error stack?
01/64
CH: A
EC: 83
EN: 01
PA: 00 00 00
00 00
| 34
Advertisement
Table of Contents
