Diagnostics; Detection Of Shorts Across Contacts - Pilz PNOZ m B0.1 Operating Manual

Function description
5.5

Diagnostics

The status and error messages displayed by the LEDs are saved in an error stack. This er-
ror stack can be shown on the display or can be read from the PNOZmulti Configurator via
the USB port.
5.6

Detection of shorts across contacts

4 test pulse outputs (T0 ... T3) are available for detection of shorts between the inputs.
If the system is in a stop state, the test pulse outputs can be switched manually via the
menu on the display.
This function can be used to
}
Commission inputs with the test pulse signal from the base unit
or
}
Locate the error source in the event of test pulse errors.
For details of how to switch the test pulse outputs manually, see section entitled
the test pulse outputs [
Operating Manual PNOZ m B0.1
1005720-EN-04
35].
Switching
| 15