Operation
8.2
Display menu
The LC display has four lines. Information can be shown and settings can be made on the
display.
Display
RUN
State of inputs/outputs and
supply voltage
ERROR
Status and error messages
DISPLAY MESSAGE
Display messages
PROJECT INFO
Project information
SHOW DEVICE INFO?
Show device information
Operating Manual PNOZ m B0.1
1005720-EN-04
Example
X3
X1
X2
T T
X4
M
Feedback
loop
E-STOP
pressed
Page 1:
Project:
PNOZ m B0.1_Agent
_OH
CRC: 0xE1A8
Page 2:
Project:
O: 06.12.2021
M: 06.02.2022
Show device
info?
Description
The lines are assigned ter-
minals X1 ... X4
State:
Input active
Input inactive
Semiconductor output active
Semiconductor output inactive
Test pulse output
Message display (bottom right):
Message present
Error message present
Line 1 ... 4: Status and error
messages as short text.
Line 1 ... 4: Customised
messages that are created
in the PNOZmulti Configur-
ator.
Page 1
2nd line: Project name
3rd line: Project name
4th line: Check sum (CRC)
Page 2
2nd line: Creation date
3rd line: Last changed
Show device information for
the base unit and expansion
modules
| 27