Operation
8.2.1
Rotary knob
8.2.1.1
Function
The menu settings are made on the unit's display via a rotary knob. You have the option to
make the settings on the knob by hand or with a screwdriver. If you make the settings with
a screwdriver, the knob can remain within the unit.
8.2.1.2
Pull out and retract the knob
Knob :
}
(A) pull out until it locks into position
}
(B) release and push it back into the unit:
– Press the bar on the side of the knob [1] towards the centre of the knob. This releases
– Press the knob downwards [2] while keeping the bar pressed in
8.2.1.3
Rotate and press the knob
The settings are made via the rotary knob, as follows:
Press knob
}
Confirm selection/setting
}
Switch to menu
Rotate knob
}
Select menu level
Operating Manual PNOZ m B0.1
1005720-EN-04
the knob.
[2]
[1]
| 30