Chip Card - Pilz PNOZ m B0.1 Operating Manual

Overview
}
LED display for:
– Error messages
– Diagnostics
– Supply voltage
– Fault at the outputs
– Fault at the inputs
}
Backlit display for:
– Error messages
– State of supply voltage
– State of the inputs and outputs
– Status information
– Device information
}
Test pulse outputs used to monitor shorts across the inputs
}
Monitoring of shorts between the safety outputs
} Plug-in connection terminals:
Either spring-loaded terminal or screw terminal available as accessories (see Order refer-
ences)
}
Rotary knob for menu control
} Expansion modules can be connected
(please refer to the document "PNOZmulti System Expansion" for details of the type and
number that can be connected)
2.3

Chip card

To be able to use the product you will need a chip card.
Chip cards are available with memories of 8 kByte and 32 kByte. For large-scale projects
we recommend the 32 kByte chip card (see Technical Catalogue: Accessories chapter).
Operating Manual PNOZ m B0.1
1005720-EN-04
| 8