End A Call - Htek UC924E User Manual

2. Press the number.
3. Press or
To place a call by call history or Directory via phone interface.
1. Press the History soft key (On the idle page) or Menu → History /Directory
2. Press and
3. Press the Send soft key, or
sending.
Note:
1. The key is set to be a send key. For more information, refer to the Key as
Send on page
2. During the call, you can also change among Headset, Handset or Free-speaker
mode.
Making two calls with one line and one account
1. Press a line key and dial one phone number, then make a call.
2. Press the corresponding line key
3. Dial another phone number,
4. Press the Send soft key, or

End a Call

Here shows to end a call during three modes:
To end a call by Handset
Press the Cancel soft key or hang up the handset, or press
To end a call under Headset Mode
Press the Cancel soft key or press
To end a call under hands-free speakerphone Mode
press the Send soft key, then the call is sending.
to select the targeted one.
, or
, then make the second call.
, or press
, or the corresponding line key, then the call is
.
Basic Call Features
101