End A Call - Htek UC926E User Manual

1. Press the , or press the Line key, then you can hear the dial tone.
2. Press the number.
3. Press or
To place a call by call history or Directory via Phone interface.
Press the History /Directory soft key (On the idle page) or Menu → History /Directory
1.
2. Press and
3. Press the Send soft key, or
call is sending.
Note:
1. The key is set to be a send key. For more information, re fer to the Key as
Send on page
2. During the call, you can also change among Headset, Handset or Free -speaker
mode.
Making two calls with one line and one account
1. Press a line key and dial the phone number, then make a call.
2. Press Hold soft key and then press New Call soft key.
3. Dial another phone number,
4. Press the Send soft key, or

End a Call

Here shows to end a call during three modes:
To end a call by Handset
Press the End Call soft key or hang up the handset, or press
press the Send soft key, then the call is sending.
to select the targeted one.
, or
, then make the second call.
, or the corresponding line key, then the
Basic Call Features
97