Htek UC924 Quick Reference

Hardware Overview
Speaker
Conference
Hold
Transfer
Redial
LED
Power Indicator: Steady green when power on, blinking green when the call is ringing.
Line Keys: Steady green: During the conversation, or plan to dial a call.
Blinking red: The call is ringing.
Off: Idle interface.
Place a call
Three ways to make a call:
Handset: Pick up the handset; enter the number, then press the send soft key or press
Speaker: Press or the line keys; enter the number, then press the send soft key or press
Headset: Press ; enter the number, then press the send soft key or press
Note: You can also use Contacts or call log to dial the number you want, press dial
key and place the call by the three ways mentioned. More, you can also alternate the
mode during the call.
End a call
To end a call in three different modes:
Handset: Hang up the handset or press the cancel soft key.
Speaker: Press , or press the cancel soft key.
Headset: Press the cancel soft key.
Answer a call
Handset: Pick up the handset.
Speaker: Press .
Headset: Press .
Power Indicator
Line keys
Softkeys
Navigation Keys
Message
Headset
Mute
Speaker
Alphanumeric
Volume Keys
Keypad
Note: You can also reject the call by press the Reject soft key.
Redial
Press to redial the last call that dialed.
Hold
Press or press the hold soft key during a call to hold the call.
Press or resume soft key to resume the call.
Call Transfer
Blind Transfer
1) Press
2) Enter the number that transfers to.
3) Press
Attended Transfer (at least one line key set as Auto)
1) Press
2) Enter the number that transfer to and press the send soft key or
3) Start the second conversation, press
Semi-Attended Transfer (at least one line key set as Auto)
1) Press
.
2) Enter the number transfer to, and then press
.
3) Press
.
Call Conference
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1) A press line 2, the call is placed on hold.
2) A enter the number of C and then press send soft key or
3) A press
4) If add D&E, press Line 3, the current conference is on hold, dial D and press
are in conference. Press line 4, and dial E, press
Note: 1) If C does not answer the call, A can back to continue the conversation with B;
2) Once A hangs up the call, the conference is ended, while if B or C drops the
call, A&C or A&B conversation continues.
Call Mute
Press to mute the microphone during the call.
Press again to un-mute the conversation.
or transfer soft key during the conversation, the call is on hold now.
or the transfer soft key and now the blind transfer completed.
or transfer soft key during the conversation, the call is on hold now.
or transfer soft key, then transfer completed.
or transfer soft key during the conversation, the call is on hold now.
, then you can hear the ring tone.
or the Tran soft key and now the Semi-attended transfer completed.
or the conference soft key, then A, B and C are now in a conference.
.
C answers the call.
, the four
, then A,B,C,D,E are in conference.