Solid green when power on, flashing red when there are new messages.
Dialing or during a conversation.
Ringing.
Idle interface.
Pick up the handset; enter the number, then press the send soft key or press
Press
or the line keys; enter the number, then press the send soft key or press
Press
; enter the number, then press the send soft key or press
Hang up the handset or press the cancel soft key.
Press
, or press the cancel soft key.
Press the cancel soft key.
Pick up the handset.
Press
.
Press
.
Press
Press
Press
1) Press
2) Enter the number you want to transfer to.
3) Press
1) Press
2) Enter the number want to transfer to and press the send soft key or
3) Start the second conversation, press
1) Press
2) Enter the number want to transfer to, and then press
3) Press
Assuming that A and B are in A conversation. A want to bring C (or D & E) in a conference:
1) A presses Hold, the call is placed on hold.
2) A presses New Call, enter the number of C and then press send soft key or
3) A presses
4) If add D&E, A press Hold, the current conference is on hold, press New Call and dial D, D answer
the call. A Press Hold and New Call and dial E, E answer the call. A press
.
are in a conference.
.
.
Press
Press
to redial the last call you dialed.
or the hold soft key during a call to hold the call.
or the resume soft key to resume the held call.
or Transfer soft key during the conversation, the call is on hold now.
or the B Transfer soft key and now the blind transfer completed.
or Transfer soft key during the conversation, the call is on hold now.
or Transfer soft key, then Transfer completed.
or Transfer soft key during the conversation, the call is on hold now.
or the Transfer soft key and now the Semi-attended Transfer completed.
or the conference soft key, then A, B and C are now in a conference.
to mute the microphone during the call.
again to un-mute the conversation.
.
, then you can hear the ring tone.
, C answers the call.
, then A, B, C, D, E
Need help?
Do you have a question about the UC924U and is the answer not in the manual?
Questions and answers