Troubleshooting; Why Is The Phone Lcd Screen Blank; Why Does The Phone Display "Network Unavailable; Why Can't I Get A Dial Tone - Htek UC924E User Manual

Hide thumbs Also See for UC924E:
Table of Contents

Advertisement

Troubleshooting

Why is the phone LCD screen blank?

1. Ensure your phone is properly plugged into a functional AC outlet.
2. Ensure that the phone isn't plugged into a plug controlled by a switch that is off.
3. If the phone is plugged into a power strip, try plugging it directly into a wall outlet
instead.
4. If your phone is powered from PoE, ensure you use a PoE compliant switch or hub, or
contact your system administrator for more information.
5. Check that the power LED is on to ensure the phone is powered on.

Why does the phone display "Network Unavailable"?

Ensure that the Ethernet cable is plugged into the Internet port on the phone and the
Ethernet cable is not loose.
Ensure that the switch or hub in your network is operational.
Contact your system administrator for more information.

Why can't I get a dial tone?

Check for any loose connections and that the phone has been installed properly. For
the Installation instructions, refer to
Check whether dial tone is present on one of the audio modes.
Switch between the Handset, Headset (if present) or Hands-Free Speakerphone to
check whether dial tone is present for one of the audio modes.
If the dial tone exists on another audio mode, connect a different handset or headset
to isolate the problem.

Where to set the tone?

You can set the tone on web interface:
Click SettingTones
Define the dial tone, ringing, busy tone...
For the tones, you can check with your system administrator.
More Click
Tone
Phone Installation
H U
Notes.
Troubleshooting
.
U H
191

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UC924E and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents