Basic Setting Configuration
3.
Click Save and restart the phone.
Press the Save soft key to accept the change or the Cancel soft key to cancel. If you are
using an xDSL modem, you can connect your phone to the Internet via PPPoE mode. You
can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP negotiation to
obtain the IP address. Contact your system administrator for the PPPoE user name and
password.
To configure PPPoE via phone interface:
1. Press MenuSettingAdvanced Settings (password: admin) NetworkWANPort
PPPoE mode.
2. Enter the User ID and password
3. Click Save and restart the phone.
58
Need help?
Do you have a question about the UC924E and is the answer not in the manual?